← All test kits Lead · dust wipe

Lead Dust Wipe Kit

Lead poisoning happens through dust, not paint chips. Three surfaces, measured in micrograms per square foot by an accredited laboratory, against published federal clearance levels — the only surface test we sell with a real number to compare against.

$249/ kit
What’s analyzed
  • Settled lead dust — floor — Reported in micrograms per square foot (µg/ft²).
  • Settled lead dust — window sill — From an interior window sill.
  • Settled lead dust — surface of your choice — A play area, high-chair tray, or window trough.
  • Clearance comparison — Each result shown against the federal clearance levels (5, 40, and 100 µg/ft²).
Why test

Childhood lead exposure runs primarily through dust rather than through paint chips. Deteriorating paint sheds fine particles that settle on floors, sills and toys, and children pick them up on their hands and then put their hands in their mouths. Testing a paint chip tells you what is on the wall; testing dust tells you what is reaching the child.

That distinction is the entire reason federal clearance testing after abatement work is done with dust wipes rather than by re-examining the paint. The dust is the exposure route, so the dust is what gets measured — and it is why this measurement has a published number behind it while almost nothing else in surface testing does.

How to collect your sample

Do not clean or vacuum the areas you intend to sample for at least a few days beforehand — you are measuring the condition you actually live in, and a surface wiped yesterday gives a falsely low result.

Use the supplied one-square-foot template. For the floor, place the template and wipe the whole area. For the window sill, wipe the entire surface and record its dimensions. For the third sample, choose the surface that matters to you and record its area. Each wipe goes into its own tube with its own label and recorded area — three wipes in one tube is one result, not three.

How the lab analyzes it

Each wipe is acid-digested to bring the collected lead into solution, and the solution is measured by flame atomic absorption spectroscopy under EPA SW-846 7000B. That mass is divided by the area you recorded to give micrograms per square foot — which is why the recorded area is part of the measurement, not an administrative detail.

The wipes meet the ASTM E1792 specification for lead sampling media, which sets limits on how much lead the wipe itself may contain and requires demonstrated recovery.

What this test does not tell you
  • A result describes the surfaces sampled at the moment they were sampled. A clear result after a thorough clean is not the same as a clear result in normal conditions.
  • It measures lead in settled dust. It does not tell you where the lead came from, and it does not measure lead in paint, water, soil or a consumer product.
  • The published clearance levels were written for verification after abatement work. They are the best available reference point, not a health threshold.
  • If a result is elevated, the right next step is your local health department and a certified lead professional — we report the measurement, not a medical action.
The Sacred Sampling standard

Laboratory data — not estimates.

Independently operated, with no ties to filter, cleanup or remediation companies. Every sample is analyzed by an accredited partner laboratory under a named, published method, with a documented chain of custody — and your data is yours.

Accredited-lab analysisNamed, published methods on real instruments.
Chain-of-custody on every kitTraceability from the moment you seal the sample.
A measurement, not a verdictWe report what the lab measured — the decision is yours.
Ready when you are

Best for: homes built before 1978, households with young children or anyone pregnant, after renovation or window work in an older home, renters documenting a concern, buyers of an older property, and independent verification after abatement.

Order today, collect the sample at home, and mail it back in the prepaid mailer.

For informational & screening purposes. This is a laboratory measurement of the samples submitted against published federal clearance levels — not a medical diagnosis or a health threshold.